Kenmore Dryer Thermostats

Observe your part

Enter your model number or a function number and click "Search"

Here is an example model number plate:

tag sample

Kenmore Appliance Parts

Pop Kenmore Dryer Thermostats

Dryer Thermal Fuse

PartSelect Number PS11741460

Manufacturer Part Number WP3392519

The Dryer Thermal Fuse (Thermal Cutoff, Temperature Fuse) is a two by ½ inch, white, plastic safety mechanism that stops the flow of electricity to the motor excursion when a dryer overheats. If the fuse is missing or broken, your dryer will not start. A thermal fuse fails when the exhaust temperature exceeds the fuse rating, that is when the temperature rises above the temperature that the fuse is designed to handle. This tin occur when a heating element is shorted, a regulating thermostat or thermister fails, or with a partially restricted frazzle vent. The fuse attaches to the blower bike housing. It must be replaced when there is no longer continuity between the terminals. This is a ane-fourth dimension fuse, significant it cannot be re-set. The replacement part features two three/16 inch terminals.

Fixes these symptoms

  • Heat stays on after drum has stopped
  • No heat or not enough heat
  • Shuts off too presently
  • See more...

Installation Instructions

ANTHONY from CHESHIRE, CT

Dryer was working, but no heat.

First I unplugged the dryer, and so removed the back panel, this exposed most all of the wiring and I could come across the heater coils.
Not knowing what the problem was I started looking at the coils and could not come across any broken parts.
So and so checked the thermal fuse for continuity I removed the two wires from it with a modest pair of needle nose pliers, it was held in place by 2 screws, one time they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading.
I replaced with a new one and put it all dorsum together the manner I took it apart.
Then I plugged information technology in and it worked first time, I now take warm dry apparel. Read more than...

Dryer Cycling Thermostat

PartSelect Number PS11741405

Manufacturer Part Number WP3387134

This thermostat (Dryer Operating Thermostat, Dryer Cycling Thermostat, Cycling Thermostat, Dryer Thermostat) is used to maintain a temperature of 155 degrees in the dryer drum. The internal bias heater as well allows this thermostat to provide a depression rut temperature of approximately 140 degrees when the low temperature setting is selected. The role measures 2 by 1.5 inches, comes in black/silverish and is constructed of plastic and metal. The thermostat attaches to the blower wheel housing.

Fixes these symptoms

  • No heat or not plenty oestrus
  • Shuts off likewise shortly
  • Takes too long to dry
  • Run into more...

Installation Instructions

Tom from High Bespeak, NC

Dryer blew cold air.

PartSelect is great for providing parts as requested. Unfortunately, neither of the ii parts I ordered were on my machine. My bad for non looking at the bodily part instead of the description. A discussion to the wise! Read more than...

Thermal Cutting-Off Kit

PartSelect Number PS334299

Manufacturer Part Number 279816

The thermal cut-off (Dryer Thermal Cut-Off Fuse Kit, Dryer Thermal Cutting-Off Kit) prevents the dryer from overheating when the dryer high limit thermostat fails in a closed circuit status. This part fails when the heater housing does not have adequate airflow through it; this is unremarkably caused by restriction in the exhaust vent, plugged lint screen, or broken blower bike. If this role fails, the dryer may not produce any oestrus. This kit includes ane high-limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees), jumper wires, and new female person spade terminals. Both components are mounted on the heater housing, and measure approximately 2 inches long and 1.5 inches wide each. This kit comes in silverish and is constructed of metal.

Fixes these symptoms

  • Heat stays on afterwards drum has stopped
  • No heat or non enough oestrus
  • Shuts off too soon
  • Come across more...

Installation Instructions

Vernon from Niceville, FL

No Heat

Outset tried heating chemical element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter beginning I would accept adamant problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most mutual failed components first before taking dryer back off. Read more...

Dryer High Limit Thermostat

PartSelect Number PS11742185

Manufacturer Part Number WP3977767

A dryer high-limit thermostat (High Limit Thermostat, Hi-Limit Thermostat, Dryer High-Limit Thermostat) is a switch that is actuated past temperature change. This high limit thermostat acts as a safety mechanism to continue the dryer from overheating. If your thermostat is malfunctioning, your dryer may not heat. This thermostat is located below the dryer vent at the dorsum of the apparatus. The terminal extension arm connects to the heater element terminal. You can test the loftier limit thermostat with a multimeter. Test the thermostat for continuity at room temperature. If your reading indicates a lacking thermostat, information technology must exist replaced. This model is made of metal and plastic, and comes in silver/black. This role features 1 high limit thermostat with a concluding extension arm.

Fixes these symptoms

  • No heat or not plenty heat
  • Shuts off too shortly
  • Takes also long to dry
  • See more...

Installation Instructions

John from Indianapolis, IN

Dryer would accept forever to dry clothes, even on high setting

I ordered all the thermal sensors for the dryer. They arrived 2 days afterwards and they were the correct parts. It took me near 1/2 hour to supersede all three sensors and at present the dryer works similar new again. My married woman was very pleased, so was I. Read more...

Thermal Fuse

PartSelect Number PS3530485

Manufacturer Function Number 6931EL3003D

This thermal fuse acts as a high-limit thermostat, and shuts off the heating chemical element when the dryer overheats by cutting off power to the dryer. If the thermal fuse has blown, the dryer will not starting time. These fuses cannot be reset, so if yours has blown, you volition need to replace it. A mutual reason for the thermal fuse to blow on a dryer is if the frazzle vent on your dryer is restricted or blocked. Hot air will be confined in the dryer and the fuse will trip and end the electricity from flowing to the gas valve or heating element.

Fixes these symptoms

  • No heat or not enough heat
  • Takes besides long to dry
  • Will Not Starting time
  • See more...

Installation Instructions

Richard from ORMOND Beach, FL

Dryer would run with no rut

I actually went to mr fix it on u tube. Great instruction on how to accept dryer apart. Beginning I unplugged the dryer. I found I could attain the heating system by removing the lint tube in the back of the dryer. I put my I phone with the light on inside the back of the dryer and tested the connections to see if all were working. The thermal fuse was not working. I removed the two wires , red on top and white on the lesser. Then used a small Phillips screwdriver to remove the ii mounting screws and removed the fuse. I then used a vacuum to articulate any lint from the back of the dryer and inside the dryer. This took me about an hr and a half. I did information technology this way considering I did non want to disassemble the unabridged dryer to get to the components. I received the fuse in iii days and tested it. Information technology was fine. I then put it in the dryer screwed it in place, connected the wires. Replaced the lint tube. This took about 10 minutes. Dryer is running keen. Read more...

Thermal Cutting-Off Kit

PartSelect Number PS334278

Manufacturer Office Number 279769

This kit includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse with a limit of 360 degrees Fahrenheit. The thermostat and fuse help prevent the dryer from overheating.

Fixes these symptoms

  • No heat or not plenty heat
  • Shuts off too soon
  • Takes as well long to dry
  • See more...

Installation Instructions

Wesley from Boyds, MD

Dryer non heating

Our dryer is viii years quondam and had been slowly taking longer and longer to dry clothes, to the bespeak that I was set to purchase a new i. When the dryer stopped heating completely, I removed the lesser panel and found that the heating element was no longer working. I checked online and found this website. The summit two recommended fixes for this event was to supplant the heating element and/or thermal cutting-off kit (two sensors). I chose to purchase both, delivered to me very rapidly (2 days). I figured for $80 y'all can't go wrong. Hither'south the procedure I followed:

On my particular model, the back does NOT come up off and all of my repairs had to exist made via the front end, bottom console.

(i) asunder half dozen wires (three pairs) from the heating element and two thermal sensors
(2) removed unabridged heating element 'sleeve" which contained both the heating element AND the two sensors. The infinite is way too tight to endeavour and practise this any other manner (and I highly recommend this method to salvage a ton of time and frustration.)
(3) vaccummed out the entire inside of the dryer, clearing all lint and debris, including tons of lint creating a blockage, thus slowing the power to dry over the years
(4) replaced sensors and heating element
(v) installed heating element & Thermal sensors back inside and reconnected all wires
(half dozen) tested dryer to ensure that heating element lit upward and produced heat - information technology worked beautifully!

Besides fixing the heating issue, cleaning out the clogged lint pipe at the dorsum of the dryer and wall have made the sometime dryer new again. It'due south working ameliorate than ever!

Read more...

High Limit Thermostat and Thermal Cut-Off Kit

PartSelect Number PS334387

Manufacturer Office Number 279973

Also known every bit Thermal Cut-Off kit. The thermostat acts every bit a safety machinery that keeps the dryer from overheating and the fuse is like a backup system - information technology's set to trip at a higher temperature than the thermostat. One time it trips, it has to exist replaced.

Fixes these symptoms

  • No heat or not enough heat
  • Shuts off too soon
  • Takes also long to dry
  • See more...

Installation Instructions

Vince from Kathleen, GA

Clothes would not Dry

I but removed the dorsum of the dryer to gain access to the heating element. In one case I removed the heating chemical element I figured I would also supersede the thermostat and thermal fuse every bit preventive maintenance. Read more...

Blower Thermostat

PartSelect Number PS8747887

Manufacturer Part Number 6931EL3002M

The thermostat is a part for your dryer, and it is roughly 1 inch long by roughly 1.5 inches broad. The purpose of the thermostat is to measure the temperature of the air within your dryer drum. Every bit the air is existence measured, it volition plough the heat on or off in lodge to maintain a stable temperature within the drum. The most common reason you would need to supercede your thermostat is if your dryer is non receiving enough estrus, or any heat at all.The tools you will need to complete this repair include a Phillips screwdriver, and a flat-head screwdriver.

Fixes these symptoms

  • No oestrus or not plenty rut
  • Shuts off too soon
  • Takes too long to dry
  • See more...

Installation Instructions

Sheryl from SPRINGFIELD, MO

Dryer not heating

I followed video instruction in disassembling and set screws from each section into diferent small bowls in the society they were removed. Hardest function was some of the screws were really hard to get loose without stripping them and my control console did non match video but I figured it out. Replacing the parts were easy and putting it dorsum together. While it was apart I cleaned everything including fan blower wheel. Thanks for the right parts and your online video. With your help and a prayer this 62 year old adult female fixed the problem and dryer runs similar new. Read more...

High Limit Thermostat

PartSelect Number PS446428

Manufacturer Part Number 3204267

This high limit thermostat is used in a dryer and monitors the temperature to make certain it does not exceed 260 degrees Fahrenheit. When your dryer temperature reaches 260 it will cut it out and simply comes back when it drops by at to the lowest degree 70 degrees Fahrenheit. If your dryer is overheating, taking too long to dry apparel, or is not producing enough heat, replacing the thermostat could be the solution to your problem. The tools needed for this part are a Phillips screwdriver, putty pocketknife, and needle nose pliers. Refer to the manual provided by the manufacturer for installation instructions and guidance.

Fixes these symptoms

  • No heat or not plenty heat
  • Shuts off too soon
  • Takes as well long to dry
  • See more...

Installation Instructions

MELISSA from OKEECHOBEE, FL

dryer does not become very hot, takes ii bike'southward to dry

removed the screws, disconnected the wires. installed the new elements replaced the wires. Read more than...

Loftier Limit Thermostat

PartSelect Number PS3530484

Manufacturer Part Number 6931EL3003C

This part is the replacement high-limit thermostat, or simply the thermostat for your dryer. Information technology is approximately 2 inches wide from tip to tip. The middle, rectangular portion of the thermostat is approximately 1 inch in width and a little more than than ane inch in length. The thermostat is a safety device that regulates the temperature within the dryer. If the thermostat is shorted out, your dryer may not be getting any heat, and y'all will need to replace it. You can examination the loftier limit thermostat for continuity by removing it and connecting it to a multimeter. Be certain to disconnect your dryer from the power source earlier you begin this repair. This is an OEM part sourced straight from the manufacturer.

Fixes these symptoms

  • No heat or non enough heat
  • See more...

Installation Instructions

Ephraim from CEDARHURST, NY

Did not heat

Called Parts Select and assisted me in proper parts needed. Drier works as new.

Took out pulsate. Establish all parts easy to locate. Found defective part and replaced with new one.

Thank you Parts Select for your assistance.

Read more...

Related Parts

  • All Kenmore Dryer parts
  • Kenmore Dryer Belts
  • Kenmore Dryer Brackets and Flanges
  • Kenmore Dryer Caps and Lids
  • Kenmore Dryer Circuit Boards and Touch Pads
  • Kenmore Dryer Doors
  • Kenmore Dryer Drums and Tubs
  • Kenmore Dryer Ducts and Vents
  • Kenmore Dryer Elements and Burners
  • Kenmore Dryer Fans and Blowers
  • Kenmore Dryer Filters
  • Kenmore Dryer Fuses
  • Kenmore Dryer Handles
  • Kenmore Dryer Hardware
  • Kenmore Dryer Hinges
  • Kenmore Dryer Hoses and Tubes
  • Kenmore Dryer Knobs
  • Kenmore Dryer Latches
  • Kenmore Dryer Lights and Bulbs
  • Kenmore Dryer Motors
  • Kenmore Dryer Panels
  • Kenmore Dryer Pulleys
  • Kenmore Dryer Seals and Gaskets
  • Kenmore Dryer Sensors
  • Kenmore Dryer Springs and Shock Absorbers
  • Kenmore Dryer Switches
  • Kenmore Dryer Timers
  • Kenmore Dryer Valves
  • Kenmore Dryer Wheels and Rollers
  • Kenmore Dryer Wire Plugs and Connectors